Sansa Fuze:
1. Turn off your player.
2. Slide the Power switch on the right side of the player down until you see the orange indicator.
3. Press and hold the << (rewind) button while connecting the player to the PC.

Sansa View:
1. Turn off your player.
2. Slide the Power switch on the left side of the player down until you see the orange indicator.
3. Press and hold the Home button (upper right corner of the scroll wheel).
4. With the Home button held down, connect the player to the PC.
5. Release the Home button once the player is detected.

Sansa Clip:
1. Turn off your player.
2. Slide the Power switch on the left of the player down until you see the orange indicator.
3. Press and hold the Select (center) button.
4. With the Select button held down, connect the player to the PC.
5. Release the Select button once the player is detected.

Sansa e200v2:
1. Turn off your player.
2. Slide the Hold switch at the top of the player towards the headphone jack until you see the orange indicator.
3. Press and hold the << (rewind) button.
4. With the << button held down, connect the player to the PC.
5. Release the << button once the player is detected.

Sansa c200v2:
1. Turn off your player.
2. Slide the Hold switch at the bottom edge of the player towards the REC button, so that the orange indicator is visible.
3. Press and hold the << (rewind) button.
4. With the << button held down, connect the player to the PC.
5. Release the << button once the player is detected

Sansa c100v1:
1. Turn off your player.
2. Press and hold the Volume down button.
3. While the Volume - (down) button is held down, connect the player to the PC.
4. Release the Volume - (down) button once the player is detected.

Sansa m200:
1. Remove the battery from the player.
2. Slide the HOLD switch at the bottom edge of the player away from the microphone until you see the orange indicator.
3. Connect the player to the PC.

Sansa Express
Sansa Express is an MTP only device.